Filter
Top Products
52
Quick Reference
FM I, II, T - FM memory level
or
MW, LW - Waveband
or
00:20 - Time played
or
12:50 - Clock
; CDC
Switches to changer operation (only if
a changer is connected).
If there is no changer, the system will
switch to AUX as long as AUX ON is
switched on in the DSC menu.
< CC
Switches to cassette operation
= TU (TUNER)
Switches to radio operation. Switches
to the memory levels/wavebands FM I,
FM II, TS (Travelstore), MW and LW.
> Cassette slot
Insert cassette (Side A or 1 facing up;
opening to the right).
? Visual theft protection
The following conditions must be ful-
filled before the light diode will flash as
a visual indication of theft protection:
The unit is switched off;
The operating panel is folded down;
The KeyCard has been removed;
The DSC menu settings is switched to
LED ON (factory setting).
For more information, refer to “DSC
programming, LED ON/OFF”.
@ KeyCard theft protection system
The KeyCard must be inserted before
the unit can be operated.
KeyCard
Inserting the KeyCard
Press 1 to unlock the operating pan-
el; it will fold down forwards.
Insert the KeyCard with the contact
points facing down (see illustration).
Lock the operating panel.
2
1
3
Perform these steps in the reverse or-
der to remove the KeyCard.
Make sure to read the information in
the section on “KeyCard theft protec-
tion system”.
A Eject
Press the Eject button briefly to eject
the cassette.
For safety’s sake, the operating
panel must remain locked when
the vehicle is in motion.
When you leave the vehicle, un-
lock the panel and remove the
KeyCard to protect the equipment
against theft.
ChicHanKanMonParis gb 95%® 14.05.2002, 14:24 Uhr52