Filter
Top Products
65
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
As soon as it is possible to receive a pro-
gram in the broadcasting network with the
PTY selected, the radio will switch over to
the corresponding station for the duration
of the program.
Example: German broadcasting network
NDR:
- Station playing: NDR3.
- “PTY” lights up in the display.
- Program type “POP” selected.
- Seek tuning is started.
- No station with “PTY-POP” can be
found.
- The display shows “NO PTY” and
- automatically switches back to NDR3.
- NDR2 airs a “PTY-POP” program.
- The radio will switch to the linked sta-
tion NDR2 for the duration of the
“POP” program.
During CD operation, the set will also switch
to the program offering the selected PTY
within the broadcasting network.
After the PTY program has ended the sys-
tem will switch back to the previous mode
(radio or CD).
Now the selected program type can be re-
called by pressing this preset when PTY has
been activated. (“PTY” appears in the dis-
play.)
Scanning stations with PTY SCAN
Requirement: “PTY” must appear in the dis-
play.
• Press the SCA button.
All of the stations in your current reception
area offering the selected program type will
be scanned.
To switch off PTY-SCAN:
• Press SCA or the seek-tuning rocker
switch once again.
After the entire waveband has been
scanned, the PTY-SCAN function will be
turned off automatically.
PTY priority
Situation:
PTY is switched on and lights up in the dis-
play.
No station offering the selected program
type can be found currently in your recep-
tion range (with seek tuning or scan).
The set will switch back to the station previ-
ously tuned into.
Radio operation with RDS (Radio Data System)
Note:
As already mentioned, these functions are
not supported by all of the RDS stations at
the present time.
ChicHanKanMonParis gb 95%® 14.05.2002, 14:25 Uhr65