Filter
Top Products
79
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
UPDATE Allows you to delete CD
names during changer oper-
ation to make room for new
CDs. (Refer to “Deleting CD
names with DSC-UP-
DATE”.)
To quit the DSC programming mode and
store the adjustment:
• Press DSC.
(See the section on “Short
Additional Memory S.A.M.”).
If you remove the KeyCard
during the reading process,
“READ KC” will appear on
the display panel.
LED ON/OFF Here you can choose be-
tween LED ON or LED OFF.
With LED ON, the “ON”
knob will flash for extra anti-
theft protection when the
unit has been switched off
and the KeyCard removed.
PEAK ON/OFF
Switches the dynamic level
display for the volume on/
off.
TOM ON/OFFIf you have a second Key-
Card with a Turn-On Mes-
sage, you can switch off this
information with “TOM
OFF”. The factory setting is
“TOM ON”.
For more information refer
to “ KeyCard theft protection
system” - “Turn ON Mes-
sage (T.O.M.)”.
AUX ON/OFF
(for Kansas DJ, Chicago
RCM 169)
This menu item will not ap-
pear unless a CD changer
has been connected to the
system. The factory setting
is “OFF”.
If another system compo-
nent is connected to AUX,
this setting must be altered
to “AUX ON”.
LEARN KC To “train” a second Key-
Card.
Please read the information
in the section on “KeyCard
theft protection system” -
“Training a second Key-
Card”.
READ KC To read out the KeyCard
data.
The card supplied with the
radio is used to display the
model name, type number
(7 6 …) and the serial
number.
With the extra card it is pos-
sible to display data entered
by your specialised dealer.
DSC programming
ChicHanKanMonParis gb 95%® 14.05.2002, 14:25 Uhr79