Blaupunkt 2000 DJ Car Stereo System User Manual


 
69
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Repeating titles with RPT
RPT = Repeat
Repeats the title currently playing. This title
will repeat until RPT is switched off. The
Repeat function will end automatically when
the cassette is removed or the unit is
switched off.
The Repeat function is active when “RPT”
is highlighted in the display.
Switching Repeat on/off:
Press RPT, the active function will ap-
pear briefly in the top line of the dis-
play (RPT ON/OFF).
To ensure that this function works properly,
there must be a pause of at least 3 seconds
between titles.
Fast tape forward/rewind
>> Fast forward
<< Fast rewind
Press REV to end fast forward or rewind.
Listening to the radio while fast
forwarding or rewinding the tape
with Radio Monitor (RM)
You can listen to the radio while fast for-
warding or rewinding the tape (for CPS as
well) instead of switching the sound to mute.
The Radio Monitor function is active when
“RM” appears highlighted in the display.
Switching Radio Monitor on/off:
Press RM, the activated function will
appear briefly in the top line of the dis-
play (RM ON/OFF).
Automatically skipping over
blank portions of the tape with
Blank Skip (BLS)
As soon as there is a break of more than 10
sec. during cassette playback, the fast for-
ward function will be activated automatical-
ly to move to the next title.
The Blank Skip function is active when “BLS”
appears highlighted in the display.
Switching Blank Skip on/off:
Press BLS, the activated function will
appear briefly in the top line of the dis-
play (BLS ON/OFF).
Cassette operation
Care instructions
You should use only C60/C90 tape cas-
settes in your car. Protect your cassettes
against dirt, dust and temperatures over
50 °C. Allow cold cassettes to warm up
somewhat before playing them to ensure
that the tape plays smoothly. Malfunctions
in playback or sound may be caused by dirt
build-up on the pinch roller and the audio
head after approx. 100 hours of operation.
To remove normal dirt build-up clean the
equipment with a cleaning cassette. In more
stubborn cases, use a cotton swab dipped
in rubbing alcohol. Never insert hard instru-
ments into the tape deck.
ChicHanKanMonParis gb 95%® 14.05.2002, 14:25 Uhr69