Filter
Top Products
61
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
• Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds, con-
firmed by a beep).
Now the station has been stored.
Note:
Should you tune into a station which has
already been stored before on another mem-
ory bank, the corresponding preset button
and the memory bank will flash briefly in the
display.
Automatically storing the
strongest stations with Travel-
store
You can automatically store the six most
powerful FM stations in your current recep-
tion area sorted according to their signal
strength. This function is particularly con-
venient on longer trips.
• Press TU, menu level 2 will appear in
the display.
• Press TS briefly.
“T-STORE” will flash in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank T
(Travelstore). If it is not possible to receive
six stations, the remaining presets will be
marked by four dashes. When this process
Changing the memory bank (FM)
You can shift between the memory banks I,
II and T in order to store stations and recall
them later. The currently selected memory
bank is indicated in the display.
• Press NEXT as often as necessary un-
til the desired memory bank lights up
in the display.
Storing stations
On FM, you can store six stations on the
preset buttons ST1 - ST6 for each of the
memory banks I, II and T.
On MW/LW, you can also store six stations
each.
• Press TU, menu level 2 will appear in
the display.
• Press BND to select the waveband.
• Use the rocker switch to tune into a
station (either automatically
/ or
manually << >>).
has been completed, the radio will play the
station with the strongest reception (ST 1).
If desired, stations can also be stored man-
ually on the Travelstore bank (see “Storing
stations”).
Recalling stored stations
You can recall any stored station at the touch
of a button.
FM
Recall the stations on the waveband select-
ed directly:
• by pressing ST1 - ST6.
To select a station on a different waveband:
• Press NEXT as often as necessary un-
til the desired memory bank appears
and then select the station by pressing
ST1 - ST6.
MW, LW
You can select the stations stored for the
selected waveband directly:
Radio operation with RDS (Radio Data System)
ChicHanKanMonParis gb 95%® 14.05.2002, 14:24 Uhr61