Filter
Top Products
91
DEUTSCH
Radio
Telefon
ENGLISH
Radio
Telephone
LOUDNESS
Boosts low frequencies for more bass, es-
pecially at low volume.
LOUD 1 - minimum boost
LOUD 6 - maximum boost
MASTER RESET
This menu item will appear only if a Key-
Card is inserted.
Important!
This function will reset all of the settings in
the DSC menu including the telephone
menu to the factory default settings.
All of the trained KeyCards and SIM cards
will be deleted, except for the KeyCard cur-
rently in the unit.
If this menu item is selected, it will be nec-
essary to enter the access code after OK.
Enter the access code, press OK.
The display will show “MASTER RESET?”:
Press CL to cancel this function, press OK
to reset all of the settings to the default set-
tings.
CHANGE ACCESSCODE
The access code is used to access the im-
portant DSC menu items (also for telephone
operation). At the factory, this code is set to
“0000”.
If you would like to alter it be sure to make
a note of the new code!
Enter the original code (in this case “0000”)
and press OK.
Enter the new code, press OK. Enter the
new code once again, press OK.
IGNITION TIMER
Use this setting to ensure that the car radio
will play for a maximum of 90 minutes after
the ignition has been switched off.
0 = ignition timer switched off.
AUXILIARY SOURCE
This menu item will not appear if a CD
changer (A 05 or A 06) has been connected
to the system.
The default setting is “AUXILIARY SOURCE
OFF”.
If an external piece of equipment is connect-
ed to the system, this setting must be
switched to “AUXILIARY SOURCE ON”.
VARIOCOLOUR
Adjusts the colour of the display illumina-
tion to the dashboard illumination.
''
green ....................................................red
KEY TONE
After a key is pressed, a short beep is emit-
ted as confirmation.
Set volume from 0 to 9 (0 = off).
Programming with DSC Radio, Cassette, Changer (optional)
You cannot alter the programming for
important DSC settings unless you have
entered the access code first (refer to the
DSC menu item “CHANGE ACCESS-
CODE”).
/ Select function
<< / >> Make setting