Filter
Top Products
93
DEUTSCH
Radio
Telefon
ENGLISH
Radio
Telephone
LEARN CARD
You can program a second KeyCard or up
to 30 SIM cards.
Refer to the information on “KeyCards and
SIM cards - Programming the KeyCard/SIM
card”.
USER MODE
You can choose among the following oper-
ating modes:
RADIO ONLY
PHONE ONLY
STANDARD
(all operating modes can be selected).
Any changes will not take effect until you
have exited the menu.
LO-LEVEL SENSITIVITY
Sets the search sensitivity for local recep-
tion.
LO-LEVEL 1 – high sensitivity
LO-LEVEL 3 – normal sensitivit
DX-LEVEL SENSITIVITY
Sets the search sensitivity for distant recep-
tion.
DX-LEVEL 1 – high sensitivity
DX-LEVEL 3 – normal sensitivity
After OK “CLEAR?” will appear in the dis-
play.
Press << / >> to choose between CLEAR?
and NAME? (alter).
Press CL to cancel the process, press OK
to confirm the process.
If you want to enter/alter names, please re-
fer to “Telephone book menu – Add entry”.
It is not possible to clear the card inserted
in the set.
Note that the master SIM card can be
cleared with the KeyCard only.
READ KEYCARD
This menu item will appear only if a Key-
Card is inserted.
It is possible to read out the data on a Key-
Card.
Using the KeyCard which was included with
the delivery, it is possible to display the
equipment data such as name, type number
(76 ...) and serial number.
If you remove the KeyCard while it is being
read, “CHANGE CARD” will appear in the
display. It is possible to read the informa-
tion on any KeyCards, even those for differ-
ent car radios. It is not possible to operate
the unit, except to switch it off. As long as a
KeyCard for this unit is inserted, you can
switch back to radio operation by pressing
OK.
VOLUME FIX
Allows you to set the volume at which the
unit switches on.
Use << / >> to set the desired volume. If
“LEVEL +00” is selected, the car radio will
switch on at the volume level which was last
set before it was switched off.
TA VOLUME
The volume for traffic messages and the
beep can be adjusted.
The traffic message will be played at this
volume if the volume currently selected is
lower. If the selected volume is louder than
the TA VOLUME the traffic message will be
played somewhat louder.
End DSC programming/save changes:
• Press DSC/OK.
Programming with DSC Radio, Cassette, Changer (optional)