Filter
Top Products
96
PIN code
(Personal Identification Number)
Normally, the SIM card will not operate the
telephone until a personal identification
number (PIN code) has been entered. This
PIN code is included with the SIM card when
you purchase it.
You can alter or even deactivate your PIN
code. Refer to “Programming with DSC –
PIN CODE”.
Inserting the SIM card/
entering your PIN code
• Switch the unit on.
With the card tongue protruding, insert
the trained SIM card into the slot
with the contact surface facing up.
“ENTER PIN” will appear in the display.
• Enter the PIN code using the number
keys, starting with the first digit.
• Press OK or #.
If the PIN code has been entered correctly,
“CODE OK” will appear in the display fol-
lowed by the menu which was used last.
If an incorrect PIN code has been entered,
“WRONG PIN-CODE” will appear in the dis-
play followed by “ENTER PIN”.
If the PIN code is entered incorrectly three
times in succession, it is necessary to use
the PUK code (Personal Unblock code) to
reactivate the card.
Reactivating the SIM card
The PUK code must be used to reactivate
the SIM card.
The display shows “ENTER PUK”.
• Enter your code and press OK to con-
firm.
• Enter a new PIN code.
Important!
Make sure you make a note of the new PIN
code!
• Confirm your entry by pressing OK and
repeat the entry.
Operating the telephone
General information
Using the Radiophone, you can make the
same telephone calls as you can with a cel-
lular phone.
Important: You must be located in an area
serviced by the GSM radio network and have
the access privileges provided by a valid SIM
card. This SIM card must be inserted into
the unit (refer to the section on “KeyCards
and SIM cards” if necessary).
Emergency calls
The number to dial to place an emergency
call in the GSM network anywhere in the
world is 112.
You can place an emergency call by dial-
ling this number even without inserting a SIM
or KeyCard.
Please read the information in the section
on “Using the telephone – GSM emergency
calls”.