Filter
Top Products
114
Ringing tone volume
Press << / >> to adjust the volume of the
ringing tone from between 0 and 9. 0 = off.
If the automatic answer function is switched
on, the volume cannot be set to “0”.
Hands-free volume
Press << / >> to adjust the volume of the
incoming call from 0 to 63 over the car
speakers.
Handset volume
This menu item will not appear unless a
Blaupunkt handset has been connected to
the system.
Press << / >> to adjust the volume of the
handset to one of three levels (low, medi-
um, high), remove the handset from the cra-
dle first.
Automatic answer
The telephone will automatically answer in-
coming calls if you press << / >> to select
“On” for this menu item.
The call will be set to hands-free operation
automatically.
In this case, do not set the ringing tone vol-
ume to “0”.
Automatic redial
If the busy signal is received, an outgoing
call will be redialled automatically if you
press << / >> to select “On” for this menu
item.
You can stop the automatic redial by press-
ing the telephone button.
Off – redial is switched off
On – redial is switched on.
The number of times the telephone will at-
tempt to redial depends on the network
used.
Operating mode
If this menu item is selected, you will be re-
quired to enter the access code after press-
ing OK.
Then select the operating mode by press-
ing <</>>:
Standard – all operating modes
Radio only – no telephone, all other
operating modes
Phone only – telephone mode only
Extended menu
Use this function to remove the following
menu items from the display in the setup
menu by pressing << / >>. These items are
seldom used.
This makes the setup menu more clear.
Off – menu items removed from display
On – all of the menu items are available.
Programming with DSC Telephone – Setup menu