Classe Audio CAP-2100 Car Amplifier User Manual


  Open as PDF
of 46
 
32
Selecting the one you want is as simple as scrolling through the list (by touching
either the up or down arrows on the right), and then touching the specific
function in the list that you want that Fkey to perform.
cautionary note on Fkey use NotethatallClasséremotecontrolsprovidethesesamefourFkeys, so that you
need not worry about which remote you happen to pick up. us F1 on the
integratedamplier’sremotecontrolsendsthesameinfraredsignalasF1 on the
CDplayer’sremotecontrol.
While this is intended to minimize confusion amongst different remotes (since
this aspect of them will all perform identically), you should take care when
assigning different functions on different components to the same Fkey.Doing
so would result in two components doing two different things at once, in
response to a single press of a button on the remote control. is can sometimes
be useful. As an example, F1 could set the integrated amplifier to the CD input,
andalsosettheCDplayertoPlay, both from the press of a single Fkey.
status
e primary function of the status screen is to provide information about the
current operating status of the CAP-2100. It also provides access to version
infoscreen,whichdisplaysinformationabouttheunit’ssoftware,andthe
sensors screen, which displays information from the internal sensors about the
temperature and input power.
version info e version info button on the status screen takes you to the version
information screen, which displays information on various pieces of software
used by your CAP-2100. If you ever have occasion to call our technical support
people to ask a question not covered in this manual, they may want to know
precisely what version of software your unit is running. Having this information
available will help enable them to give you the best possible service.
sensors e sensors button on the status screen takes you to the sensors screen, which
displays information about several internal sensors within the CAP-2100. It is
unlikely you might ever need the sensor information, unless directed to do so by
a customer service representative at Classé in order to help troubleshoot some
unexpected problem.
CAN-Bus Classé’sControllerAreaNetwork,orCAN-Bus,opensthewaytoanewlevel
ofinteractionbetweenourDeltarangeofampliers,preamps,processorsand
sourcecomponents.WhentheCAP-2100isconnectedwithCAN-Bus,the
dierentelementsofaDeltaseriessystemareinconstantcommunication,
creating a “global” network that delivers system wide status information and
shared operational features, all through the touchscreen display.
 previous next