Classe Audio CAP-2100 Car Amplifier User Manual


  Open as PDF
of 46
 
33
features CAN-BuswillallowasingleDeltaseriestouchscreento:
• Displaystatusinformationforeveryconnectedunit,including
amplifiers which do not have a touchscreen display.
• Createa“PlayLink”thatallowsanSSPorPreamptoautomatically
switchtothecorrectinputwhenaDeltaseriessourcecomponent
starts playback.
• Adjusttheglobalsystembrightness.
• Conguretheentiresystemtogoinandoutofstandbyatthe
touch of a button and also bring individual components in and
out of standby.
• Muteanyconnectedunit.
hardware setup 1 Classé Delta Series Products
TwoormoreClasséDeltaseriesproductsarerequired,atleastoneofwhich
must have a touchscreen display.
2 Category 5 Network Cables
ese are ordinary network cables, commonly used for broadband Internet
connections. ey should be typical “straight through” cables not the “crossed
over” type, and the total required will be one less than the total number of
Deltaseriescomponentsinyoursystem.
3 CAN-Bus Terminator
AsingleCAN-BusTerminatormayberequired.Itisinsertedintothe
CAN-BusOUTconnectorofthelastcomponentintheCAN-Busdaisy
chain.Oneis
includedintheboxwithyourCAP-2100.T
hey are also
available free of charge from your nearest Classé Customer Support Centre
http://www.Classeaudio.com/support/service.htm
4 SSP-300 & 600 CAN-Bus Interface Box
Systems that include an SSP-600 or SSP-300 will also require an
SSP-300/600CAN-BusInterfaceBox.eseareincludedwiththeproductsor
available free of charge
from your nearest Classé Customer Support Centre
http://www.Classeaudio.com/support/service.htm
 previous next