Filter
Top Products
2-Way RF Compact Color Touchpanel Crestron STX-1550C
1 The location of the STRFGWX and the orientation of the antenna are important
factors in the RF performance. Locate the unit outside of any metal enclosures and
position the antenna horizontally, pointing straight out of the unit. Adjust the
antenna to achieve the best range. The range of the unit is also dependent on its
placement and the construction of the building in which it is used
.
Installers can run multiple STRFGWX units which have built-in intelligence so that
if both (or several) gateways receive a button press from the touchpanel, only the
strongest signals produce an action in the control system. Crestron recommends that
the latest firmware be loaded into the touchpanel and STRFGWX. If the firmware of
the STX-1550C is upgraded, the associated STRFGWX(s) must also be upgraded at
the same time.
2 The latest software version can be obtained from the What’s New page (SIMPL
Windows, VisionTools Pro-e and Crestron Database sections) or Downloads page
(SIMPLWIN, VTPRO-E, and CRESDB Libraries) of Crestron’s website
(www.crestron.com)
. New users are required to register in order to obtain access to
the FTP site.
3 Touchpanels and STRFGWXs with later versions of firmware may include features
not mentioned in this guide. Newer versions of this guide can be obtained from the
Downloads page (MANUAL Library) of Crestron’s website.
4 Firmware upgrade files can be obtained from the What’s New page (Touchpanels
section) or the Downloads page (TOUCHPNL and UPGRADES Libraries) of
Crestron’s website. If the firmware of the STX-1550C is upgraded, the associated
STRFGWX(s) must also be upgraded at the same time.
5 CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP.
Filenames for CNX update files have a UPZ extension and ST-CP files are in one
EXE or zipped UPZ file. All can be obtained from the What’s New page (Control
Systems Update Files section) or Downloads page (OPSYS Library) of Crestron’s
website.
6 The weight listed is for the touchpanel and does not include the ST-BTP, ST-DS, or
external power pack.
As of the date of manufacture, the unit has been tested and found to comply with
specifications for CE marking.
NOTE: Equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. The equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
4 • 2-Way RF Compact Color Touchpanel: STX-1550C Operations Guide - DOC. 5812A