Filter
Top Products
Crestron STX-1550C 2-Way RF Compact Color Touchpanel
General Use and Safety
WARNING: To avoid shock hazard and possible damage to the unit, do not use
touchpanel in rain or expose it to unnecessary moisture.
Recommended Touchpanel Cleaning
Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long term contact with abrasive materials can scratch the
surface which may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Surrounding plastic enclosure
may not provide a complete water-tight seal. Therefore, apply cleaning solution to
the cloth rather than the surface of the touchscreen. Wipe touchscreen clean and
avoid ingress of moisture beneath panels.
Applying Power
The touchpanel can be powered via the ST-BTP, while docked in the ST-DS, or via
the external power pack. Each of these items has their own Operations Guides which
details proper usage. Refer to the table below for the required document number.
STX-1550C Power Source Options
POWER SOURCE OPTION NOMENCLATURE
DOCUMENT
NUMBER *
Battery Pack ST-BTP 5746
Docking Station ST-DS 5738
Domestic External Power Pack or PW-1215 5762
International External Power Pack PWI-1215 5763
*
The latest revision may have a revision letter after the document number (i.e.,
5746A).
Identity Codes
The STX-1550C touchpanel uses three distinct types of identity (ID) codes: Cresnet
identity (NET ID), RF ID, and RF CHANNEL. These codes are assigned to the
touchpanel from the Interface Submenu when the unit is configured. Refer to “Setup
Menu” on page 7. For the touchpanel to be identified within the Cresnet system,
these assignments must match assignments made in the SIMPL Windows program.
The RF CHANNEL assignment made for the STRFGWX is made in the Crestron
Viewport via SIMPL Windows or VT Pro-e. Refer to “SIMPL Windows” on
page 13.
NET ID
Every equipment and user interface within the Cresnet system requires a unique NET
ID. These codes are recognized by a two-digit hexadecimal number from 03 to FE.
The NET ID of the unit must match the NET ID specified in the SIMPL Windows
program. The NET ID is used when the touchpanel is wired directly to the control
system during uploading a VT Pro-e project or upgrading the touchpanel firmware.
Operations Guide - DOC. 5812A 2-Way RF Compact Color Touchpanel: STX-1550C • 5