Filter
Top Products
37
Program name is displayed on receiving a RDS station. “AF” starts blinking if the broadcasting signals getting
worse.
There are 3 state the segment AF on the TFT display:
Segment “AF” off: AF switching mode off.
Segment “AF” on: AF switching mode on, and has RDS information.
Segment “AF” flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all the time. The interval of
checking time of each AF depends on the signal strength of the current station, from a few minutes for a strong
station to a few seconds for a weak state.
Every time when new AF is stronger than the current station, it switches over to that frequency for very short
time. Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of
normal program.
During FM mode, when AF is on, manual store, auto store/preset scan function can only receive and save RDS
program.
REG (Regional Program) function
Press and hold the AF/REG button, or click the icon on the touch screen to turn on/off region mode.
Some broadcasting stations change their program from normal broadcasting to regional broadcasting for a
certain time period. When region is on, the current listening program remains unchanged. When region is off, it
allows the reception moves to the regional station.
(Traffic Announcement) function
Press the button or click the icon on the touch screen to turn on/off TA search mode.
When mode is on and a traffic announcement is transmitted: