Filter
Top Products
8
2. DIN REAR-MOUNT (Method B)
If your vehicle is a Nissan, Toyota, follow this mounting instruction. Use the screw holes marked T (Toyota), N
(Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with
your vehicle.
Fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with the screw
holes on the unit, and then tighten the screws (5x5mm) on each side.
Note:
The outer trim ring, mounting sleeve and the metal strap are not used for method of installation.
REMOVING AND PROTECTING DETACHABLE FRONT PANEL
The front panel of the unit may be removed as a theft deterrent. After removing the front panel, use the case
provided to keep the front panel from getting damaged.
1. Press the RELEASE button to release the front panel.