Filter
Top Products
~
HD5212
Operation
Power
Press the
(!)
(power) button (1) or any other button
on
the front
of
the radio
(except release) to turn the unit on.
Press
and
hold the power button to turn
the unit off.
Liquid
Crystal
Display
(LCD)
The liquid crystal display (LCD) panel (8) displays the frequency, time and
activated functions
of
the unit, including a disc indicator, which appears lit
when a disc
is
inserted.
Press the
(!)
(power) button (1) to change the LCD backlight brightness from
HIGH (default) to MIDDLE to LOW.
NOTE:
LCD
panels
may
take
longer
to
respond
when
subjected
to
cold
temperatures
for
an
extended
period
of
time. In
addition,
the
visibility
of
the
numbers
on
the
LCD
may
decrease
slightly.
The
LCD
display
will
return
to
normal
when
the
temperature
increases
to a
normal
range.
Mode
Press SRC (2) to select a different mode of operation, as indicated on the
display panel. Available modes include
HD
RADIOITUNER (F1, F2, F3,
AM1, AM2), SAT RADIO (if connected), COP PLAY (CD), USB
PLAY,
SO
PLAY,
iPod (if connected) and AUX (auxiliary). COP mode appears
in
the
menu only if a CD
is
present in the CD player.
NOTE: COP
PLA
Y,
USB PLAY,
SO
PLA
Y,
satellite
radio
and
iPod
modes
are
only
available
if
the
associated
device
or
media
is
inserted.
Audio
Mute
Press the MUTE button (6) to silence the audio volume. "MUTE" flashes in
the display. Press any button to cancel MUTE.
Volume
/
Audio
Control
To
increase the volume, rotate the rotary encoder (4) clockwise.
To
decrease the volume, rotate the rotary encoder counter-clockwise. When
volume is adjusted, the volume level will be shown on the display panel as a
number ranging from "VOL 00" (lowest) to "VOL 100" (highest).
8
Press the rotary encoder repeatedly to step through the following audio:
VOLUME, BASS, TREBLE, BALANCE, and FADER. The unit automatically
exits audio control mode after five seconds of inactivity.
BASS
To
adjust the bass level from "-10" to "10", press the rotary encoder until
"BAS" appears
on
the display. Rotate the control clockwise to increase or
counter-clockwise to decrease the bass. "00" represents a flat response.
TREBLE
To
adjust the treble level from "-10" to "10", press the rotary encoder until
"TRB" appears
on
the display. Rotate the control clockwise to increase or
counter-clockwise to decrease the treble. "00" represents a flat response.
BALANCE
To
adjust the balance from
"10l"
(full left) to
"1
OR"
(full right), press the
rotary encoder until
"BAl"
appears on the display. Rotate the control to
adjust the balance between the left and right speakers. "L=R" represents a
center balance.
FADER
To
adjust the fader from
"1
OF"
(full front) to
"1
OR"
(full rear), press the rotary
encoder until "FAD" appears
on
the display. Rotate the control to adjust the
fader between the front and rear speakers. "F=R" represents
an
equal
balance between the front and rear speakers.