Filter
Top Products
HD5212
~
Satellite
Radio
Operation
Listeners can
subscribe
to XM® Radio
on
the Web
by
visiting
www.xmradio.com.
or
by
calling
(800) 967-2346.
Customers
should
have
their
Radio ID
ready
(see
"Displaying
the
Identification
(ID)
Code").
Customers
can
receive a
limited
number
of
free-to-air
channels
without
activation.
Listeners can
subscribe
to SiriuS® Radio
on
the Web
by
visiting
www.sirius.com.
or
by
calling
(888) 539-SIRIUS.
Customers
should
have
their
Sirius
ID
ready
(Sirius ID is
located
on
the Satellite Radio
Tuner,
sold
separately).
Customers
can
listen
to
music
samples
by
tuning
to
channel
184.
Accessing
Satellite
Radio
Mode
To
switch
to
satellite radio mode, press the SRC button (2) until "XM
RADIO" or "SIRIUS" appears
on
the display. This will not
be
displayed
unless the unit
is
connected
an
optional Sirius or
XM
receiver.
CD
,
Displaying
the
Identification
(10)
Code
Before you listen to satellite radio,
you
must subscribe
to
the service using
your radio's identification number.
To
display the radio
ID,
press the TUNEI
CH
« button
(11)
to access channel
ODD.
The screen displays the radio
ID
where the channel name is usually displayed.
13
Selecting
a
Station
Press the TUNE/CH » or TUNE/CH « button (10 and
11)
to
change to
another station.
Press and hold the TUNE/CH » or TUNE/CH « button for
more than one second to fast forward or fast reverse through the stations.
Preset
Stations
Press the BAND button (3)
to
change between three user preset channel
groups. Each channel group stores
up
to
six preset stations.
You
can store
and recall a total of
18
preset stations.
Store
a Station
1.
Select a channel group, then select a station.
2.
Hold a preset button (13 - 18) for three seconds. The preset number
appears
in
the display.
Recall
a Station
1.
Select a channel group.
2.
Press a preset button (13 - 18) to select the corresponding stored
station.
Tuner
Modes
Press the DISP button (7) to change the tuner mode
to
the following options
in
the order listed.
Channel Name
Genre (News, Sports, Hits, Kids, etc.)
Artist name
Song Name
If the selected channel name, artist, or title exceeds eleven characters, the
display information will scroll twice upon selection.
Direct
Tuning Mode
To
enter a station directly, perform the following steps.
1.
Press the SELECT button (5)
to
enter direct tuning mode.
2.
Turn the rotary encoder
to
display "XM
CH
" or "SR
CH
".
3.
Turn the rotary encoder again
to
select the first digit of the desired
channel
(0,
1,
or 2).
4.
Press the BAND/ENTER button (3)
to
enter the first number and move
to the second position.
5.
Turn the rotary encoder again to select the second digit of the desired
channel
(0
-
9).