Filter
Top Products
HD5212
~
60
19
CD
Player
Operation
cop mode can only be accessed when a disc
is
inserted. If a disc
is
already
in
place, press the SRC button (2)
to
access
COP
mode and begin
playback automatically.
Insert
CD
Press the open button (9)
and allow the front panel to
fold down to display the
disc slot. With the label
surface facing up, fully
insert a compact disc into
the slot until the
mechanism engages and
pulls the disc
in.
After
inserting a disc, lift the front
panel up to return it to the
closed position and begin
playing the disc.
Eject
CD
To
eject a disc, first press
the open button (9) and
allow the front panel to fold down to display the disc slot (24).
Press the eject button (25) located to the right of the disc slot to eject the
disc. If the disc
is
not removed from the unit within 15 seconds, the disc will
be
reloaded to prevent accidental damage.
NOTE: The
unit
is
designed
for
play
of
standard
5"
(12 cm.)
compact
discs
only. Do
not
attempt
to
use
3"
(8 cm.)
CD
singles
in
this
unit,
either
with
or
without
an adaptor,
as
damage to the
player
and/or
the
disc
may
occur.
Such
damage
will
not
be
covered
by
the
warranty
on
this
product.
Pause
Press the
1/>/11
button (13) to suspend disc play. Press the play/pause
button again to resume disc play.
Track
Select
Press the TUNE/CH » (10) or TUNE/CH
«(11)
button for less than one
second to advance to the next track
on
the CD. The selected track number
15
will appear
on
the display. Press
and
hold the TUNE/CH » (10) or TUNE/
CH
« (11) button for more than one second to fast forward or fast reverse
through the disc. CD play starts when the button
is
released.
Intro
Scan
(SCN)
During disc
play,
press 2/SCN (14) to play the first 10 seconds
of
each track
on the disc. When the desired track is reached, press 2/SCN again to end
the scan and play the selected track.
Repeat
(RPT)
Press 3/RPT (15) during disc play to continuously repeat the track. Press 3/
RPT again to stop repeating.
Random
(SHF)
Press 4/SHF (16) during disc play to play all tracks on a CD
in
random,
shuffled order. Press 4/SHF again to stop random play.
Display
103
Tag
Information
Press the DISP button (7) to display any text encoded on the CD (song title,
artist, etc.).
CD
Player
Error
Codes
If a problem should develop while operating the CD player,
an
error code
(Error
1,
Error
2,
etc.) may appear
on
the display panel. This can indicate a
number of problems with the unit, including a mechanical error or
an
error
in
the microprocessor control
of
the player. If
an
error code should appear, try