Filter
Top Products
HD5212
~
NOTE: The HD5212
will
not
select
video files regardless
of
whether
or
not
a video file was the
last
file
playing
when the
iPod
was
plugged
into
the radio.
Only
music
files are supported.
Turning
the
iPod
On/Off
The iPod power turns on automatically when the iPod
is
connected to 30-
pin iPod cable, as long
as
the automobile ignition
is
turned on.
You
can turn
the iPod off
by
disconnecting
it
from the cable or by turning the ignition off.
When the ignition
is
turned off, the iPod will pause and then enter sleep
mode after 2 minutes.
iPod
Operation
Accessing iPod
Mode
This unit
is
equipped with
an
iPod ready function that will allow you to
control your iPod (if compatible) using the front panel control buttons. The
following iPod versions are supported:
iPod
3G
(Firmware version 2.2 only)
iPod Mini
iPod Photo
iPod Nano
iPod
5G
(Video)
The unit will automatically switch to iPod mode when
an
iPod
is
plugged
into the iPod cable.
To
return to the iPod menu from any other source menu,
press the SRC button (2) on the front panel or remote control until "IPO"
appears
on
the display.
NOTE: The
iPod
will
continuously
recharge when
connected
to unit,
as
long
as the vehicle
ignition
is
turned
on.
Display
Information
iPod song information, when available, appears
on
the LCD screen
automatically during playback. Press the DISP button (7) to manually
display iPod playback information
in
the following order:
Track/Elapsed Time
Song TITLE
ARTIST
CATEGORY (Album Name)
Clock
Play/Pause
Press the
1/>/11
button (13) to suspend or resume play. "PAU" flashes
on
the
display when paused.
Track
Selection
Select
a Track
Press the TUNE/CH » (10) or TUNE/CH « (11) for less than 1 second to
advance to the next song
in
the current category. When a song has been
playing for at least one second, press the TUNE/CH « (11) to replay the
song from the beginning. When a song has been playing for more than one
second, you must press TUNE/CH
«twice
to move to the previous file.
Fast
Forward
/ Fast Reverse
Press and hold the TUNE/CH » (10) or TUNE/CH « (11) for more than 1
second to fast forward or fast reverse. Playback begins when the button is
released.
Repeat
(RPT)
Press the RPT button (15) during disc play to continuously repeat the
selected song. Press RPT again to stop the repeat function.
Press and hold the RPT button (15) for more than 3 seconds to
continuously repeat the entire album/folder. Press and hold RPT again to
stop the repeat function.
@2
7
6
~19
10
l--I-f+--II-.
@-
21