Filter
Top Products
HD5212
~
Tuner
Operation
Press the SRC button (2) to switch to HD RADIO mode.
About
HD
Radio™
Technology
HD
Radio technology allows CD-quality digital broadcasting of your local
AM
and
FM
radio stations. HD Radio broadcasts can include multiple
channels on the same frequency, which
is
called multicasting. With
multicasting, you can receive up to three additional multicast channels:
HD2, HD3, HD4. With your HD5212 radio, you will receive HD Radio digital
broadcasts automatically when tuned to a station that offers HD Radio
technology.
Select
a Band
Press the BAND button (3) to change between three
FM
bands and one AM
band. Each band stores up to six preset stations.
@--+-++-r
Tuning
When tuning to
an
HD Radio channel, "LINKING" will appear on the LCD
while the initial digital information is received. Once linked, "Hd1" appears
in
the bottom left corner
of
the LCD.
NOTE: Not all FM
or
AM
stations offerHD Radio (digital) broadcasting.
You
will receive both analog and digital stations with the HD5212.
Manual Tuning
Press the TUNE/CH » (10) or TUNE/CH « (11) button for more than three
seconds to enter manual tuning mode, then press the TUNE/CH »
or
11
TUNE/CH « buttons to move the radio frequency number up or down one
step.
Auto Seek Tuning
Press the TUNE/CH
»(10)
or
TUNE/CH « (11) button to automatically
seek the next station.
Mono/Stereo
Press the MONO button (19) to select mono or stereo reception for analog
radio stations.
You
can sometimes improve reception
of
weak stations by
selecting mono operation. When in stereo mode, the "ST" icon (18) appears
on the display.
HD
Radio Multicast Channels
To
tune to
an
HD Radio multicast channel, tune to the main signal and then
press the SELECT button (5). If a subchannel is available, the
corresponding multicasting number appears
in
the bottom left corner of the
LCD.
Preset
Stations
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Hold a preset button (13-18)
for three seconds. The preset number will appear
in
the display.
PRESS AND HOLD
PRESET NUMBER APPEARS