Kenwood DPX-U5120 Car Stereo System User Manual


 
English
|
17
Tuner Operation
Basic Operation
Selecting Tuner source
Press the [SRC] button.
Select the “TUNER” display.
Selecting the Receiving Band
Press the [BAND] button.
Pressing the button switches the receiving band
(FM1, FM2, FM3, AM).
Selecting the Receiving station
Press the [4] or [¢] button.
Details of the station selecting in operation are
set in the “Seek Mode”/ “SEEK MODE” of <Tuner
Setting> (page 17).
Tuner Setting
You can select the following Tuner Setting items.
1
Select Tuner source
Press the [SRC] button.
Select the “TUNER” display.
2
Enter Function setting mode
Press the [VOL] knob.
3
Turn the [VOL] knob and press it when the desired
item is displayed.
Select “Settings”/ “SETTINGS”.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the desired
item is displayed.
Display Overview
“Settings”/
“SETTINGS”
“Seek Mode”/
“SEEK MODE”
Selects the tuning mode of the radio.
“Auto1”/ “AUTO1”: Automatic search for a
station.
“Auto2”/ “AUTO2”: Search in order of the
stations in the Preset memory.
“Manual”/ “MANUAL”: Normal manual
tuning control.
“Auto Memory”/
“AUTO MEMORY”
Memorizes 6 stations with good reception
automatically.
Refer to <Auto Memory Entry> (page 17).
“Forced MONO”/
“FORCED MONO”
Reduces the noise when stereo broadcasts are
received as monaural.
“ON”/ “OFF”
( : Factory setting)
5
Make a setting
Turn the [VOL] knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
Remarks
• Forced MONO
Strong electrical fields (such as from power lines) may
cause unstable sound quality when it is set to ON. In such
a situation, turn it OFF.
Station Preset Memory
Putting a station in the memory.
1
Select the frequency to put in the memory
Press the [4] or [¢] button.
2
Select the number to put in the memory
Press the [1] – [6] button for at least 2 seconds.
Up to 6 stations with a different band (FM/AM) can be
memorized to the [1] – [6] button according to the setting
of “Tuner Preset Type”/ “PRESET TYPE” of <Initial Settings>
(page 30).
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1
Select the radio band you wish to store in the
preset memory
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Auto Memory Entry mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”/ “SETTINGS” > “Auto
Memory”/ “AUTO MEMORY”.
4
Open Auto Memory Entry
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “YES”.
When 6 stations that can be received are put in the
memory, auto memory entry closes.
SRC
VOLBAND
4 ¢
1 – 6
B64-4805-00_01_DPXU6120_M_en.indd 17 11/02/02 15:07