Filter
Top Products
English
|
37
DSP Setup
Car Type Selection
You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types.
Display Overview
“OFF” Not compensating.
“Compact” Compact car
“Full size car” Full size car
“Wagon” Station wagon
“Minivan” Minivan
“SUV” Sport-utility vehicle
“Minivan (Long)” Long Minivan
( : Factory setting)
1
Select the source
Press the [SRC] button.
Select a source other than “STDBY”.
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Cabin select mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Audio Control” > “Detailed Setup” >
“Car Type”.
4
Select the car type
Turn the [VOL] knob to select the car type, and
then press the [VOL] knob.
5
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
• You can compensate the distances in more details by using
<Car Type Fine Adjustments> (page 38) function.
Speaker Setting
The speaker X’Over is automatically set when the
position and size of each speaker are selected from
the following items.
Speaker Item Range
“Front” “SIZE”
Speaker Size Front
“O.E.M.”, “10cm”, “13cm”, “16cm”,
“17cm”, “18cm”, “4x6”, “5x7”, “6x8”,
“6x9”, “7x10”
“LOCATION”
Speaker Location Front
“Door”, “On Dash”, “Under Dash”
“TWEETER”
Speaker Size Tweeter
“None”, “Use”
“Rear” “SIZE”
Speaker Size Rear
“None”, “O.E.M.”, “10cm”, “13cm”,
“16cm”, “17cm”, “18cm”, “4x6”, “5x7”,
“6x8”, “6x9”, “7x10”
“LOCATION”
Speaker Location Rear
• “Door”, “Rear Deck”
• “2nd Row”, “3rd Row” (Car Type:
“Minivan”, “Minivan (Long)”)
“SubWoofer” “SIZE”
Speaker Size Subwoofer
“None”, “16cm”, “20cm”, “25cm”,
“30cm”, “38cm Over”
( : Factory setting)
1
Select the source
Press the [SRC] button.
Select a source other than “STDBY”.
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Speaker setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Audio Control” > “Detailed Setup” >
“Speaker Setting”.
4
Select the item you want to set
Operation type Operation
Selects the item. Turn the [VOL] knob.
Adjust each item. Press the [
4
] or [
¢
] button.
Set the value Press the [VOL] knob.
5
Exit Function setting mode
Press the [ ] button for at least 1 second.
Function of DPX-U6120
SRC
VOL
4 ¢
B64-4805-00_01_DPXU6120_M_en.indd 37 11/02/02 15:07