Kenwood DPX-U5120 Car Stereo System User Manual


 
English
|
21
Continuing the Current Call
1
Press the [VOL] knob.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “REJECT”.
Answering the Waiting Call after Terminating
the Current Call
Press the [SRC] button.
Switching between the Current Call and Waiting
Call
Press the [VOL] knob.
Each pressing of this knob switches the calling
party.
Other Functions
Clearing the Disconnection Message
Press the [LOG] buttons for at least 1 second.
“HF Disconnect”/ “HF D-CON” disappears.
Making a Call
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Select a dialing method
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
“Phonebook” Selecting the initial to be searched for the phone
book.
“Incoming Calls” Calling a number in the incoming call list.
“Outgoing Calls” Calling a number in the outgoing call list.
“Missed Calls” Calling a number in the missed calls list.
“Number Dial” Making a call by entering phone number.
Operation method of each mode is described
below.
3
Exit the dialing method mode
Press the [LOG] button for at least 1 second.
Speed Dialing (Preset Dial)
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Select the number you want to recall from the
memory
Press the [1] – [6] button.
3
Make a call
Press the [VOL] knob.
You need to register the preset dial number. Refer to
<Registering to the Preset Dial Number List> (page 22).
Calling a Number in the Phone Book
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Select the Phone Book mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Phonebook”.
3
Select the initial to be searched for
Operation type Operation
Move to the next character. Turn the [VOL] knob.
Determine the selected initial. Press the [VOL] knob.
4
Select the name
Operation type Operation
Select the Phone number. Turn the [VOL] knob.
Select the name. Press the [
4
] or [
¢
] button.
Switching between Display Modes
Press the [DISP] button.
5
Make a call
Press the [VOL] knob.
During search, a non-accent character such as “u” is
searched for instead of an accent character such as “ü”.
B64-4805-00_01_DPXU6120_M_en.indd 21 11/02/02 15:07