Kenwood DPX-U5120 Car Stereo System User Manual


 
32
|
DPX-U6120/ DPX-U5120/ DPX-MP3120
Audio Adjustments – DPX-U6120 –
“Volume offset” Sets each source’s volume as a difference from
the basic volume.
“–8” — “±0” (AUX: “-8”— “+8”)
“2Zone” Sets the Dual Zone System.
- <Dual Zone System> (page 35).
“2Zone Select”
“Preset” Sets the audio preset.
- <Audio Preset Memory> (page 39).
- <Audio Preset Recall> (page 39).
( : Factory setting)
1
Select the source
Press the [SRC] button.
Select a source other than “STDBY”.
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Audio Control mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Audio Control”.
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
Remarks
• DSP Set
When “DSP Set” is set to “Bypass”, the DSP function is
disabled , and the colored items can not be set.
• HIGHWAY-SOUND
Increases the volume of faintest sound being lost by road
noises to make the sound more audible. Additionally, it
accentuates bass sound being lost by road noises to make
the bass sound more dynamic.
• Supreme+ (Supreme Plus)
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range that is cut
off when encoding. The bass and vocal sound that are cut
off by encoding are supplemented for the reproduction
of natural sound quality. Supplementing is optimized by
compression format (AAC, MP3 or WMA) and processed
according to bit rate. The effect is negligible with music
that is encoded at high bit rate, variable bit rate or has
minimal high frequency range.
The bass and vocal sound of Music CD/ iPod is also
supplemented.
• Dual Zone System
Main source and sub source (Auxiliary input) output Front
channel and Rear channel separately.
Audio Control
You can adjust the following Audio Setting items.
Display Overview
“Audio Control”
“SubWoofer Level”
You can set subwoofer level.
“–15” — “0” — “+15”
“DSP Set”
“Bypass”: Disables the DSP function.
“Through”: Enables the DSP function.
“Equalizer” Sets the sound quality.
- <Preset Equalizer curve Select> (page 33).
- <Manual Equalizer Control> (page 33).
“Bass Boost”
Sets the Bass Boost level in two steps.
“OFF”/ “Step1” – “2”
“HIGHWAY-SOUND”
Compensates the low volume or bass sound
being lost by road noises to make vocal sound
clearer.
Unavailable when the tuner source is selected.
“OFF”/ “Step1”/ “2”/ “3”
“Supreme+”
Turns ON/OFF the Supreme plus function.
Can be set while Music CD source, Audio file
source of USB and iPod source.
“ON”/ “OFF”
“Position” Compensates the sound environment in
accordance with the listening position.
- <Listening Position Selection> (page 34).
- <Listening Position Fine Adjustments>
(page 34).
“Balance”
Adjusts left/right speaker balance.
(Left) “L15” — “0” — “R15” (Right)
“Fader”
Adjusts front/rear speaker balance.
(Rear) “R1”5 — “0” — “F15” (Front)
“2Zone Rear Volume” Refer to <Dual Zone System> (page 35).
“SubWoofer”
Turns on/off the subwoofer output.
“ON”/ “OFF”
“Detailed Setup”
“Car Type” To get clear sound, set the sound environment
according to the location and size of physically
installed speakers with reference to the
followings:
- <Car Type Selection> (page 37).
- <Speaker Setting> (page 37).
- <Car Type Fine Adjustments> (page 38).
- <X’Over Setting> (page 38).
“Speaker Setting”
“Car Type Adjust”
“X'Over”
Function of DPX-U6120
SRC
VOL
4 ¢
B64-4805-00_01_DPXU6120_M_en.indd 32 11/02/02 15:07