Kenwood DPX-U5120 Car Stereo System User Manual


 
20
|
DPX-U6120/ DPX-U5120/ DPX-MP3120
Operation of hands-free phoning
Connecting a Bluetooth Device
Before use the Bluetooth device, you need to
connect Bluetooth device to this unit. The following
3 steps procedure is necessary.
Step 1. Pairing (Registering from Bluetooth
devices)
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing).
1
Turn on this unit
Press the [SRC] button.
2
Start registering a this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select “KCA-BT200”/ “KCA-
BT300” from the list of connected units.
3
Enter a PIN code
Input the PIN code (“0000”) in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
PIN code is set to “0000” as the default. You can
change this code. Refer to <Registering PIN
Code> (page 44).
4
By operating the Bluetooth device, start hands-
free connection.
Step 2. Connection
If you have registered 2 or more cell-phones, you
need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 44).
When a cell-phone is connected, the “BT” indicator
is light up.
Step 3. Hands-free phoning
You can do hand-free phoning when the
connection is made.
When registering from this unit, refer to <Registering
Bluetooth device> (page 43).
Receiving a Call
Answering a Phone Call
Press the [VOL] knob.
The following operations disconnect the line:
- Insert a CD.
- Connect a USB device.
The name of the calling party is displayed if it has already
been registered in the Phone Book.
Rejecting an Incoming Call
Press the [SRC] button.
During a Call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode
Press the [6] button.
Switches between Private talk (“PRIVATE”) and
Hands-free talk each time this button is pressed.
Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.
Call Waiting
Answering Another Incoming Call with the
Current Call Suspended
1
Press the [VOL] knob.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “ANSWER”.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory)
SRC
VOLLOG
4 ¢
1 – 6
DISP
ATT
B64-4805-00_01_DPXU6120_M_en.indd 20 11/02/02 15:07