Kenwood DPX-U5120 Car Stereo System User Manual


 
P.CONT
ILLUMI
REMOTE CONT
REMOTE INPUT
STEERING WHEEL
ANT.
CONT
MUTE
+
English
|
53
Connecting Wires to Terminals
Front output (DPX-U6120/ DPX-U5120 only)
Rear output/ Sub Woofer output
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left speaker
To front right speaker
To rear right speaker
To rear left speaker
If no connections are made, do not let the wire come out from the tab.
Blue/White (Power control wire)
Blue (Antenna control wire)
Orange/ White (Dimmer control wire)
When using the optional power amplifier, connect to its power
control terminal.
To car light control switch
Depending on what antenna you are using, connect either to
the control terminal of the motor antenna, or to the power
terminal for the booster amplifier of the film-type or short pole
type antenna.
Brown (Mute control wire)
To use the steering wheel remote control feature, an exclusive
remote adapter (not supplied) that matches your car is required.
Light Blue/ Yellow (Steering
remote control wire)
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
To connect the Kenwood navigation system, consult your
navigation manual.
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire) · (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse
box
Battery
To Kenwood disc changer/External optional accessory
(DPX-U6120 only)
To connect these leads, refer to the relevant instruction
manuals.
FM/AM antenna input (JASO)
Antenna Cord
Wiring harness
(Accessory 1)
Fuse (10A)
B64-4805-00_01_DPXU6120_M_en.indd 53 11/02/02 15:07