Filter
Top Products
English
|
33
Manual Equalizer Control
You can adjust the following Equalizer Control
items.
Band Item Range
“BAND1” (62.5 Hz) “GAIN” Band level -9 –+9 dB
“EFCT” Bass Effect
“ON”/ “OFF”
“BAND2” (250 Hz) “GAIN” Band level -9 –+9 dB
“BAND3” (1 kHz) “GAIN” Band level -9 –+9 dB
“BAND4” (4 kHz) “GAIN” Band level -9 –+9 dB
“BAND5” (16 kHz) “GAIN” Band level -9 –+9 dB
( : Factory setting)
1
Select the source
Press the [SRC] button.
Select a source other than “STDBY”.
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Manual Equalizer Control mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Audio Control” > “Equalizer” > “Manual
Equalizer”.
4
Select the item you want to set
Operation type Operation
Selects the item. Turn the [VOL] knob.
Adjust each item. Press the [
4
] or [
¢
] button.
Set the value. Press the [VOL] knob.
5
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
• When “iPod” is selected in the section <Preset Equalizer
curve Select> (page 33), Manual Equalizer Control is disabled.
• You can select for each source.
Preset Equalizer curve Select
You can select the following Equalizer curve.
Display Equalizer curve
“Natural” Natural
“User” User*
“Rock” Rock
“Pops” Pops
“Easy” Easy
“Top 40” Top 40
“Jazz” Jazz
“Game” Game
“iPod” iPod (During iPod source only)
* The Equalizer curve set in the section <Manual Equalizer
Control> is recalled.
( : Factory setting)
1
Select the source
Press the [SRC] button.
Select a source other than “STDBY”.
2
Enter Function setting mode
Press the [VOL] knob.
3
Enter Preset Equalizer mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Audio Control” > “Equalizer” >
“Preset Equalizer”.
4
Select the Equalizer curve
Turn the [VOL] knob.
✍ Select the iPod Equalizer curve
You can select from 22 Equalizer curve types for
iPod when “iPod” is selected.
1. Enter iPod Equalizer mode
Press the [VOL] knob.
2. Select the iPod Equalizer curve
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
• You can select for each source.
B64-4805-00_01_DPXU6120_M_en.indd 33 11/02/02 15:07