Filter
Top Products
Preparation section
11
Controls and indicators
Turning the knob switches the display contents.
TAPE RVS. ? £
REC. MODE ? ‚
A.MEMORY (or AUTO PRESET ?)
(Only when the TUNER input is selected) §
AUX INPUT ? I
(Only when the AUX input is selected)
BALANCE ? U
BACK LIGHT ? 9
A.P.S. SET ? 9
TIMER SET ? P
÷ The function of the control knob returns to the normal
mode when it has not been operated for 20 seconds.
* About the volume/multi control knob
*
After selecting the function of this knob with the
menu key, select the desired control item by turn-
ing the volume/multi control knob.
To set or enter the setting of the selected item,
press the set/demo key.
1 Display
2 sound key
%
Used for switching the EX.BASS play and LOUDNESS play.
3 AUX key I
Press to listen to the input source connected to AUX (analog
external).
4 TAPE0 key ™
Press to open or close the cassette holder.
5 Standby / timer indicator
Light in standby mode of power.
Red :Normal standby mode
Amber :Timer standby
Extinguished :Power off
6 POWER( ) key $
7 Remote sensor #
8 0MD key u
This key is pressed to remove disc.
9 MD rec key ª
0 CD0 key ^
Press to open or close the CD tray.
! CD6 key ^
Press to select the CD input and start CD playback.
Press during CD playback to let it pause temporarily.
@ MD6 key *
Press to select the MD input and start MD playback.
Press during MD playback to let it pause temporarily.
Press during MD recording to let it pause temporarily.
# phones jack %
Headphones with a stereo mini plug (optional) can be con-
nected.
$ Cassette holder
Press the TAPE0 key to open or close.
% menu key
Press to switch the function of the volume/multi control
knob.
This key is also used when setting the time of the day.
O
^ set/demo key
Press to set or enter an item selected with the volume/multi
control knob.
£U
Used for demonstration ON/OFF. 4
& Skip/search (4/ ¢) keys
During CD or MD operation :
&(
Press to skip tracks in the forward or backward direction.
During TAPE operation : £
Press to search in the forward or backward direction.
During TUNER operation : ¢
Press to receive a preset station.
These keys are also used during MD editing, track number
selection and title character selection.
E
* volume/multi control knob !
Normally this is used for volume adjustment.
( Mini Disc insertion slot
) TAPE rec key
⁄
Press to start recording. Pressing the key during recording
stops it after leaving a non-recorded space (blank) of about 4
seconds.
¡ TUNER/band key ¢
The received broadcasting band is switched.
Press to select the TUNER input.
™ 7STOP key
Press in power standby mode to display the clock.
£ TAPE` keys ™
Press to select the cassette TAPE input and play a tape.
Press during playback to change the tape transport direction.
¢ CD tray
Press the CD0 key to open or close.
menu
down
volume/
multi control
up
set/demo