Filter
Top Products
49
Application section
MD Edit Functions
1
3
2
TRACK EDIT
SET
P.CALL
SET
0
COMBINE
0
1+0023 ?
0
COMBINE
0
3+0043 ?
Combining two tracks
(TRACK COMBINE)
Combines two adjacent tracks into a single track.
After this operation, the track numbers of tracks
located after the combined tracks are decreased
automatically.
Select “COMBINE”.
÷ To combine two tracks during playback, press the TRACK
EDIT key while the second track is being played.
“COMBINE” cannot be selected if the track be-
ing played is the first track on the disc.
(If you combine tracks during play-
back, go to step 3.)
2 Select “COMBINE”.
1 Press the TRACK EDIT key.
3 Set it.
1 MOVE
2 COMBINE
3 ERASE
When pressed
in stop mode
Each press switches the operation.
When pressed
in play mode
1 DIVIDE
2 COMBINE
3 ERASE
4 MOVE
Select the track to be combined.
1 Select the track number.
4
ENTER
C
OMPLETE
(Track No. and title of the second track are cleared.)
Track No. and title of the first track are left.
Execute the track combine operation.
After editing, eject and remove the mini
disc.
2 Set it.
Perform the operations in the following procedure while the display is blinking.
CBA ED F
BA FE
1
2
345
1
23456
C+D
P.CALL
To increase
track No.
To decrease
track No.
When pressed in stop mode
Always eject the MD after title entry or editing.
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.
÷ To abort "COMBINE" in the middle, press the TRACK
EDIT key.