Filter
Top Products
Basic section
28
11
22
33
C
01 0:00
D
KENWOOD
Recording on MD
This unit cannot record audio in monaural, LP mode.
MD recording is possible as “digital recording”, where the digital signal of the CD is used as it is, and as
“analog recording”, where the analog signal of a broadcast etc. is converted to a digital signal.
1. Make the preparations for recording.
In the direction of the arrow
1 Open the write protect tab of the Mini Disc to make it recordable.
ˇ
2 Load the Mini Disc.
2. Select the source to be recorded.
Select an input source other
than “MD”
CD : Only digital recording
TAPE : Only analog recording
TUNER (Broadcasts) : Only analog recording
AUX (External input) : Only analog recording
"Adjusting the AUX input level" I
Pause the recording
Stop the recording
CAUTION
The MD cannot be loaded or ejected while the unit is in standby mode.
Do not force load a MD in standby mode, otherwise malfunction will result.
Example:
To select the CD input
Stop the recording
Pause the recording
÷ If a CD or tape has already been loaded, it starts to play now. Press the 7STOP
key to stop it.
÷ If the CD input is selected, the digital input is recorded automatically.
CD
6
22
The character information display shows
the recording input source.