Kenwood HM-382MD Car Stereo System User Manual


 
Basic section
26
TUNER/band
menu
down
volume/
multi control
up
AUTO
TUNED
T
FM 87.50MHz
U
NER P-- WE
set/demo
Collective presetting of stations
Receiving broadcast station
1 Receive a broadcast.
÷ A maximum of 40 stations of the band presently being
received will be preset.
÷ When there are many stations and the intended station
has not been preset, please also use “One-by-one
presetting (manual
preset)”.
2 Select “A.MEMORY ?”
(or “AUTO PRESET”).
Channel space setting
(Except for
the United Kingdom )
The space between radio channels has been set to the one
that prevails in the area to which the system is shipped.
However, if the current channel space setting does not
match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in
the following table or vice versa, proper reception of AM/FM
broadcasts cannot be expected. In this case, change the
channel space setting in accordance with your area by
referring to the following table.
CHANNEL
Space Frequency
Area
1
2
USA, Canada and South
American countries
Other countries
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz
1 Turn power on.
2 Press the TUNER/band key.
3 Press the 7STOP key. (for more than 5 seconds)
4 Select the mode by using the 7STOP key.
Each press switches the space frequency alternately.
1 "FM 50 kHz" (FM 50 kHz, AM 9 kHz)
2 "FM 100 kHz" (FM 100 kHz, AM 10 kHz)
5 Establish the selection by pressing the set/
demo key.
Blinks.
AUTO MEMORY ...............For U.K. and Europe
AUTO PRESET ..................Other countries