Filter
Top Products
Application section
50
MD Edit Functions
1
TRACK EDIT
P.CALL
SET
SET
C
OMPLETE
ENTER
3
4
2
3
TRACK EDIT
C
OMPLETE
ENTER
P.CALL
SET
4
0
ERASE
0
2ERASEko
1
2
A
ERASE
L
LERASEko
Erasing a single track
(TRACK ERASE)
or erasing all tracks on a disc
(ALL ERASE)
TRACK ERASE
During playback, it is possible to erase only the
track being played. The track numbers of the
tracks after the erased track will be adjusted.
Be careful in using this operation because a track
cannot be recovered once it has been erased.
ALL ERASE
During stop, all tracks can be erased. Be careful
in using this operation because the tracks can-
not be recovered once the entire minidisc has
been erased.
Stop the disc.
Perform the operations in the following procedure while the display is blinking.
Play the track to be erased.
1 Select “ERASE”.
2 Set it.
Execute the erase operation.
After editing, eject and remove the mini
disc.
÷ A track can also be erased by selecting the track
number with the 4 or ¢ key.
3 Set it.
Execute the erase operation.
After editing, eject and remove the mini
disc.
Select “ERASE”. Select “ALL ERASE”.
Erasing a single track
Erasing all tracks on a disc
1 Select “ERASE”.
2 Set it.
“ALL ERASE ?” is displayed.
Always eject the MD after title entry or editing.
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.
÷ To abort "TRACK ERASE" in the middle, press the
TRACK EDIT key.
÷ To abort "ALL ERASE" in the middle, press the
TRACK EDIT key.
÷ To delete a track while in stop mode, use the
procedure for "Erasing all tracks on a disc" and select
the track to be deleted using the 4 or ¢ key in
step 2-2.
÷ "COMBINE" is not displayed during playback or
pause of the first track.