Filter
Top Products
Application section
54
MD Edit Functions
3
DISC
TO
R
E
S
..
ENTER
TITLE
INPUT
0
MD
1 Press the ENTER key to set the title input.
2 Press the TITLE INPUT key to exit from
editing.
3 Press the 0 MD key and eject the MD.
÷ When the ENTER key is pressed , the selection of the
next title (disc title or track title) to be edited can be
restarted. To continue editing of another title, repeat the
above procedure from step 1-2.
1 Perform step 1 in "Assigning a title to a
disc or track" to select the disc title or
track title to be changed or erased.
2 Press the 1 or ¡ key to place the
cursor on the character to be modified or
erased.
Executing title input
÷ If it is required to insert a character, place the
cursor on the character immediately before the
desired insertion location.
Changing or deleting a title
÷ If power is switched off (to STANDBY mode)
or the TITLE INPUT key is pressed to cancel
setting before the ENTER key is pressed
here, the inputs made until then will be cleared.
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.
3 Press the CLEAR/DELETE key to delete
the character. (If you are erasing the title,
go to step 5.)
4 If you are changing the title, perform step
2 in "Assigning a title to a disc or track".
5 Perform step 3 in "Assigning a title to a
disc or track".
Erasing all titles
1 Select the MD input and press the TITLE
INPUT key.
2 Press the 4 or ¢ key repeatedly to
select "ALL ERASE".
3 Press the SET key to set the "ALL ERASE"
selection.
4 Press the ENTER key to erase all titles.
5 Press the TITLE INPUT key to exit from
editing.
÷ All of the disc and track titles are erased.
6 Press the 0 MD key and eject the MD.