Filter
Top Products
English
|
59
Adding a Voice Dialing Command
Add a voice tag to the phone book for voice dialing.
You can register up to 35 voice tags.
1
Enter Bluetooth mode
KIV-BT901: Press the [ ] button.
KIV-701: Press the [iPod] button for at least 1
second.
2
Enter Phone book name edit mode
Turn the [Volume] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Voice Tag” >
“Phonebook Name Edit”.
3
Search for the name to register
Select the name to register with reference to 4 in
<Calling a Number in the Phone Book> (page 34).
If a voice tag has already been registered for a
name, “*” is displayed before the name.
4
Select a mode
Turn the [Volume] knob.
Display Operation
“Phonebook Name Registration” Register a voice tag.
“Phonebook Name Check”* Play a voice tag.
“Phonebook Name Delete”* Delete a voice tag.
* Displayed only when a name for which a voice tag has
been registered is selected.
Select “Phonebook Name Registration”
(Registration)
5
Press the [Volume] knob.
6
Register a voice tag (first)
“Enter Voice 1” is displayed.
When a beep is heard, say a voice tag within 2
seconds.
7
Confirm the voice tag (second)
“Enter Voice 2” is displayed.
When a beep is heard, say the same voice tag as
that you said in step 6 within 2 seconds.
“Completed” is displayed.
8
End registration
Press the [Volume] knob.
Return to step 3. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [Volume] knob allows you to retry
voice input. Refer to <Troubleshooting Guide> (page 84).
Select “Phonebook Name Check” (Play)
5
Press the [Volume] knob.
Play the registered voice and return to step 3.
Select “Phonebook Name Delete” (Delete)
5
Delete a voice tag
Press the [Volume] knob.
6
Turn the [Volume] knob to select “YES”, and
then press the [Volume] knob.
Exit BT Setting mode
Press the [MENU] button for at least 1 second.
⁄
• Audio sound is not output during voice tag registration.