Filter
Top Products
34
At a glance
Quick reference COMAND
̄ Quick reference COMAND
Switching on
̈ Turn the key in the steering column
lock to position 1 or 2.
or
̈ Press e.
In both cases, the system will activate
the operating mode which was active
when the system was switched off.
Switching off
̈ Turn the key in the steering column
lock to position 0 and pull the key out.
or
̈ Press e.
The volume is adjusted jointly for the
telephone*, the navigation system and the
Voice control system.
The volume setting applies to other
operating modes as well: Radio, CD,
CD changer, MP3-CD and DVD.
When you adjust the volume, the system
will automatically store the setting for the
current operating mode. The volume for
the navigation announcements can only be
changed while an announcement is being
made.
i
You have the following options to
control the system:
ț at the COMAND
ț at the multifunction steering wheel
(refer to vehicle Operator’s Manual)
ț using the Voice control system*
(refer to separate operating
instructions for further information)
This Operator’s Manual describes the
control at the COMAND.
Unless otherwise indicated, the
descriptions and illustrations refer to
the COMAND.
Switching the COMAND control unit
on and off
i
If the key is not in the steering lock in
position 1 or 2, the system will
automatically stop after around 30
minutes. A warning is displayed prior to
the system switching off.
Volume