Filter
Top Products
Technical Specifications Appendix A
EuroPak-15a Receiver User Manual Rev 5 113
INPUT/OUTPUT CONNECTORS
Antenna Input TNC female jack, 50 Ω nominal impedance
+5 VDC, 100 mA max
(output from EuroPak-15a to antenna/LNA)
PWR 4-pin LEMO connector
EuroPak-15a
Input Voltage: +9 to +18 VDC
Power Consumption: 6 W (typical)
EuroPak-15aT
Input Voltage +11 to +18 VDC
Power Consumption 13 W (typical)
COM1
COM2
AUX
I/O
OSC
DB9P connector
DB9P connector
DB9P connector (Reserved)
DB9S connector
BNC connector
a
Oscillator input on the EuroPak-15a
Input Frequency 5 or 10 MHz ± 0.5 ppm
Signal Level 0 to +13 dBm
Oscillator output on the EuroPak-15aT
Output Frequency 10 MHz
Signal Level +10 dBm ± 3 dB
Phase Noise
0.1 Hz -55 dBc/Hz
1 Hz -95 dBc/Hz
10 Hz -125 dBc/Hz
100 Hz -155 dBc/Hz
1 kHz -165 dBc/Hz
10 kHz -165 dBc/Hz
100 kHz -165 dBc/Hz
ENVIRONMENTAL
Operating Temperature EuroPak-15a: -40°C to +50°C
EuroPak-15aT: -20°C to +50°C
Storage Temperature -45°C to +95°C
Humidity Not to exceed 95% non-condensing
a. The EuroPak-15a provides an external oscillator input on this connector while the EuroPak-15aT
provides an output from the internal clock.