Novatel 15aT Car Satellite TV System User Manual


 
Commands Chapter 5
EuroPak-15a Receiver User Manual Rev 5 63
5.3.13 RESET Hardware Reset
This command performs a hardware reset. Following a RESET command, the receiver will initiate a cold-start
bootup and will retain the most recent receiver configuration (that is, channel configuration).
The optional delay field is used to set the number of seconds the receiver is to wait before resetting.
Syntax: Message ID: 18
Example:
RESET 5
See also the FRESET command.
RESET [ DELAY ]
Field
Field
Name
Valid Values Description Format
Binary
Bytes
Binary
Offset
1 header
This field contains the Abbreviated ASCII command name. See Section 4.1 on
Page 31.
H 0
2 delay Any ulong value.
Seconds to wait before resetting. If no
value is provided, the default of 0
seconds is assumed.
ULong 4 H