Filter
Top Products
88 EuroPak-15a Receiver User Manual Rev 5
Chapter 6 Data Logs
6.3.8 RXCOMMANDS Receiver Configuration
This log outputs all of the current receiver configuration parameters set using the commands in Chapter 5.
When requested, one RXCOMMANDS log is output for each command type. The embedded message is the
most-recent command string entered by you for that command type. If you have not yet entered a command
string for that command type, the default configuration values from start-up are provided.
Log Type: Polled Message ID: 579
Recommended Input:
LOG RXCOMMANDSA ONCE
Example Output:
#RXCOMMANDSA,COM1,59,77.5,FINE,334,237306.911,00E40008,0000,33331;
4,COM COM1 9600 N 8 1 N OFF ON*A5267A8D
#RXCOMMANDSA,COM1,58,77.5,FINE,334,237306.914,00E40008,0000,33331;
20,CHANCONFIG 16GPSL1L5*63C63093
#RXCOMMANDSA,COM1,57,77.5,FINE,334,237306.914,00E40008,0000,33331;
5,ECUTOFF 10.0*B85DB8B9
#RXCOMMANDSA,COM1,56,77.5,FINE,334,237306.916,00E40008,0000,33331;
7,FIX NONE*BC3BA5EC
#RXCOMMANDSA,COM1,55,77.5,FINE,334,237306.916,00E40008,0000,33331;
21,PULSEBLANKING L1 127*EC7B5565
#RXCOMMANDSA,COM1,54,77.5,FINE,334,237306.916,00E40008,0000,33331;
21,PULSEBLANKING L5 127*409DCBCE
#RXCOMMANDSA,COM1,53,77.5,FINE,334,237306.919,00E40008,0000,33331;
39,DLLORDER GPS 1*63D03A14
#RXCOMMANDSA,COM1,52,77.5,FINE,334,237306.919,00E40008,0000,33331;
2,ANTENNAPOWER OFF*100A691D
#RXCOMMANDSA,COM1,51,77.5,FINE,334,237306.919,00E40008,0000,33331;
3,CLOCKADJUST DISABLE*CBDEACCB
#RXCOMMANDSA,COM1,50,77.5,FINE,334,237306.921,00E40008,0000,33331;
4,COM COM3 115200 N 8 1 N OFF ON*9FA0AF3C
#RXCOMMANDSA,COM1,49,77.5,FINE,334,237306.921,00E40008,0000,33331;
47,POSITIONTYPE GPSL1*F455BBD0
#RXCOMMANDSA,COM1,32,77.5,FINE,334,237306.937,00E40008,0000,33331;
45,SDLLBW 0 0.2000*287F8BC9
#RXCOMMANDSA,COM1,31,77.5,FINE,334,237306.939,00E40008,0000,33331;
45,SDLLBW 1 0.2000*91909AD3
Field Field Name Data Description Format Bytes Offset
1 header
This field contains the message header, in ASCII or Binary format.
See Section 4.3 on Page 35.
H 0
2
command
type
Indicates which command the embedded message
represents, see Table 43 on Page 90.
Int 4 H
3 e msg
Embedded message of the most-recent command
string you entered. If a command string has not been
entered yet, the default values from start-up will be
provided.
Uchar
[variable]
variable H+4
4 32-bit CRC (ASCII and Binary only) Hex 4 variable