Filter
Top Products
114 EuroPak-15a Receiver User Manual Rev 5
Appendix A Technical Specifications
A.1.1 Port Pin-Outs
Table 53: EuroPak-15a Serial Port Pin-Out Descriptions
Table 54: EuroPak-15a I/O Port Pin-Out Descriptions
For strobe signal descriptions, please see Section 2.3.1, Strobes on Page 26.
Connector
Pin No.
COM1
COM2
a
a.The internal COM3 port is labelled
COM2 on the EuroPak-15a.
1 Reserved N/C
2RXD1RXD2
3 TXD1 TXD2
4N/C Reserved
5GNDGND
6 Reserved N/C
7RTS1RTS2
8CTS1CTS2
9 Reserved N/C
Connector Pin No.
Signal
Name
Signal Descriptions
1 Reserved
2 PPS Pulse per second
3 MSR Measure output
4 MKI Mark input
5 PV Valid position available
6 Reserved
7 RESETOUT Reset output to an external system, active high
8 ERROR Indicates a fatal error when high
9 GND Digital ground