Filter
Top Products
16
Memory playback/random playback/repeat playback
Memory playback (CD)
This unit can store up to 25 tracks in the memory. Use
the remote control.
Stop the unit before proceeding with the steps.
1. Press the remote control MEMORY button.
Example: Audio CD loaded
Example: MP3/WAV disc loaded
2. Add tracks to the memory.
Example: Audio CD
Use the skip (
/ ) buttons to select a track to store.
When using an audio CD, you can also select tracks
using the number buttons (“Direct playback using track
numbers”).
Press the play( )button to add the track to the program.
Repeat these procedures to add other tracks as needed.
Example: MP3/WAV disc
Follow the procedures in "Selecting tracks on MP3/WAV
discs".
3.
Folder number File number Program number
Press the play( )button to start playback.
Skipping to search for a track
Press the skip ( / ) buttons to play tracks from
earlier or later in the program. Keep pressing until the
desired track is selected.
During playback, press skip ( ) button once to
return to the beginning of the current track. To return
to the beginning of an earlier track, keep pressing skip
( ) button.
Checking the program content
When stopped, use the search ( / ) buttons to
showtrack numbers and playback times.
Clearing tracks from the program
When stopped, press the CLEAR button to remove the
last track that was added to the program.
Adding tracks to the end of the program
When stopped, use the skip ( / ) buttons to show
the track that you want to add and press the play ( )
button to add it to the end of the program.
Ending memory playback
Press the stop ( ) button to stop playback, and then
press the MEMORY button.
Memory playback will also end if you press the tray
open/close ( ) button to open the tray or press the
ON/STANDBY button to put the unit into standby.
Random playback (CD/USB)
Use this function to play back tracks in random order.
Press the RANDOM button to turn random playback on/
off.
When using an audio CD or MP3/WAV disc
You can reorder the tracks randomly and play them all
once. Stop the unit before setting this mode.
Press the RANDOM button to enter the random playback
mode. The
will appear.
If you press the RANDOM button during playback,
the current playback mode (either “Normal Play” or
“Random Play”) will appear, but the playback mode
cannot be changed.
Random playback will be canceled in the following cases.
When the unit is put into standby
If the disc tray is opened