Onkyo C-N7050 Car Stereo System User Manual


 
25
Settings
Audio Output
Make the audio output (digital/analog) settings. Select
one of the three modes according to the D/A conversion
characteristics. This section mainly describes about
digital output. Analog output signals are basically D/A
converted audio signals.
Mode 1: This mode converts the signals to PCM
44.1/48 kHz, which can be handled by most devices.
Audio with PCM 48 kHz or more sampling
frequency will be down-converted to PCM 44.1/48
kHz before being output.
DSD audio will be digitally output at PCM 44.1 kHz.
Mode 2 (default setting): Use this mode for a device
compatible with up to PCM 192 kHz digital signal
input.
Audio with up to PCM 192 kHz sampling frequency
will be output without conversion.
DSD audio will be digitally output at PCM 44.1 kHz.
Mode 3: This mode converts DSD signals to analog
signals before outputting them.
DSD audio will not be digitally output.
Audio with up to PCM 192 kHz sampling frequency
will be output without conversion.