Filter
Top Products
16
[MPEG artifact reduction]: Smooth
out transitions on digital pictures.
You can switch this feature on or off.
[Colour enhancement]: Make
colours more vivid and improve the
details in bright colours. You can
switch this feature on or off.
[Gamma]: Adjust the midtone
intensity in the picture. Black and
white are not affected.
[PC mode]: Adjust the picture when a PC
is connected to the TV via HDMI or DVI.
[Light sensor]: Adjust settings dynamically
based on the current lighting conditions.
[Picture format]: Change the picture
format.
[Screen edges]: Adjust the viewing area.
(when set to maximum, you may see
noise or the rough edge of an image).
[Picture shift]: Adjust the picture position
for all picture formats except for [Auto
zoom] and [Wide screen].
Change picture format
1 Press ADJUST.
2 Select [Picture format], then press OK.
3 Select a picture format, then press OK.
Summary of picture formats
The following picture settings can be
Note
Depending on the format of the picture
source, some picture settings are not available.
Manually adjust picture settings
1 Press .
2 Select [Setup] > [TV settings] >
[Picture], then press OK.
3 Select one of the following settings, then
press OK.
[Smart picture]
picture settings.
[Reset]: Reset to factory default settings.
[Contrast]: Adjust the intensity of
backlight areas, while the video contents
are kept unchanged.
[Brightness]: Adjust the intensity and
details of dark areas.
[Colour]: Adjust colour saturation.
[Hue]: Compensate for colour variations.
[Sharpness]: Adjust sharpness in the
image.
[Noise reduction]: Filter and reduce
noise in an image.
[Tint]: Adjust the colour balance in an
image.
[Custom tint]: Customise tint setting.
(Only available if [Tint] > [Custom] is
selected)
[Digital Crystal Clear]/[Pixel Plus]/[Pixel
Plus HD]: Fine-tune each pixel to match
surrounding pixels. This setting produces
[HD Natural Motion]: (For Pixel Plus
HD) Minimise juddering effects and
enhance picture smoothness.
[100Hz Clear LCD]: (For Pixel Plus
HD) Reduce motion blurring and
make picture more clear.
[Advance sharpness]: Enable
superior picture sharpness.
[Dynamic contrast]: Enhance
contrast. [Medium] setting is
recommended.
[Dynamic backlight]: Adjust
brightness of the TV backlight to
match lighting conditions.
EN
Downloaded From TV-Manual.com Manuals