Filter
Top Products
40
Select speaker output with Adjust menu
If [EasyLink] or [EasyLink autostart] are
selected, access the adjust menu to switch the
TV audio.
1 While you watch TV, press ADJUST.
2 Select [Speaker], then press OK.
3 Select one of the following, then press
OK:
[TV]: On by default. Stream TV
audio through TV and the connected
HDMI-CEC audio device until the
connected device switches to system
audio control. TV audio is then
streamed through the connected
device.
: Stream audio through
the connected HDMI-CEC device.
If system audio mode is not enabled
on the device, audio continue to
stream from the TV speakers. If
[EasyLink autostart] was enabled,
the TV prompts the connected
device to switch to system audio
mode.
Maximise display for subtitled video
Some subtitles can create a separate subtitle
bar under the video, which limits the video
display area. After you switch on auto subtitle
shift, the subtitles display over the video
image, which maximises the video display area.
1 Press .
2 Select [Setup] > [TV settings] >
[EasyLink] > [Auto subtitle shift] > [On],
then press OK.
Set TV speakers to EasyLink mode
If you connect an HDMI-CEC compliant
device that includes speakers, you can choose
to hear the TV from those speakers instead of
the TV speakers.
When you play content from an EasyLink
compliant home theatre, if you want to
mute the TV speakers automatically, turn on
EasyLink mode.
If the connected device is HDMI Audio Return
Channel (ARC) compliant, and you connect
the device through an HDMI ARC connector,
you can output TV audio through the HDMI
cable. You do not need an additional audio
cable.
1 Make sure that the EasyLink-compliant
device is connected through an HDMI
ARC connector (see ‘Back connections’
on page 34).
2 Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3 Select one of the following, then press
OK.
[Off]: Switch off TV speakers.
[On]: Switch on TV speakers.
[EasyLink]: Stream TV audio
through the connected HDMI-CEC
device. Switch the TV audio to the
connected HDMI-CEC audio device
through the adjust menu.
[EasyLink autostart]: Turn off TV
speakers automatically and streams
TV audio to the connected HDMI-
CEC audio device.
Note
To mute the TV speakers, select [TV
speakers] > [Off].
EN
Downloaded From TV-Manual.com Manuals