Philips 32PFL3406H Car Satellite TV System User Manual


 
24
View Scenea
You can display a default picture as the
wallpaper on your TV. You can also load another
picture as the wallpaper.
If the sleeptimer is off, the wallpaper is displayed
for 240 minutes. Otherwise, it is displayed for
the duration of the sleeptimer.
Switch on Scenea
1 Press .
2 Select [Scenea], then press OK.
» If no picture has been set, the default
picture is displayed.
» If a customised Scenea picture is
loaded, that picture is displayed (see
‘Customise the Scenea picture’ on
page 24).
Customise the Scenea picture
You can load another picture as the wallpaper.
Note
When you load a new Scenea picture, it
overrides the current Scenea picture.
To use another picture as the wallpaper, you
need a USB storage device that contains a
picture that is less than 1 MB in size.
1 Load a picture smaller than 1MB in size
into a USB storage device.
2 Connect the USB storage device to the
TV.
3 Press .
4 Select [Browse USB], then press OK.
5 Select a picture, then press
OPTIONS.
6 Select [Set as Scenea], then press OK.
» 
7 Press OK
button to exit Scenea.
Lock or unlock one or more channels
1 Press > [Setup] > [Channel settings] >
[Child lock] > [Channel lock].
» A list of channels is displayed.
2 Select the channel that you want to lock
or unlock, then press OK.
» 
channel, you are prompted to enter
your PIN code.
3 Enter your code and press OK.
» If the channel is locked, a lock icon is
displayed.
4 Repeat the process to lock or unlock
more channels.
5 To activate the locks, switch the TV on
and off.
» When you switch channels with CH
- or CH +, the locked channels are
skipped.
» When you access the locked channels
from the channel grid, you are
prompted to enter your PIN code.
Set parental ratings
Some digital broadcasters rate their
programmes according to age. You can set
your TV to display only programmes with age
ratings lower than your child’s age.
1 Press .
2 Select [Setup] > [Channel settings] >
[Child lock] > [Parental rating].
» A code setup screen appears.
3 Enter your code using Numeric buttons.
» The rating menu appears.
4 Select an age rating, then press OK.
5 Press to exit.
EN
Downloaded From TV-Manual.com Manuals