Filter
Top Products
2 Touch A SUB TITL.
3 Touch a to turn assist subtitles on.
# To turn assist subtitlesoff, touch b.
Setting angle icon display
You can set up that the angle icon appears on
scenes where the angle can be switched.
1 Touch SETUP and VISUAL and then
touch M. ANGLE.
2 Touch a to turn angle icon display on.
# To turn angle icon display off, touch b.
Setting the aspect ratio
There are two kinds of display. A wide screen
display has a width-to-height ratio (TV aspect)
of 16:9, while a regular display has a TVaspect
of 4:3. Be sure to select the correct TVaspect
for the display connected to REAR MONITOR
OUT.
! When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16: 9
may result in an unnatural picture.
! If you select the TVaspect, this units dis-
play changes to the same setting.
1 Touch SETUP and VISUAL and then
touch TVASPECT.
2 Touch any of the following touch panel
keys to select the TVaspect.
! 16: 9 Wide screen picture (16:9) is dis-
played as it is (initial setting)
! LETTER BOX The picture is theshape of a
letter box with black bands at thetop and
bottom of the screen
! PANSCAN The picture iscut short at the
right and left of the screen
Notes
! When playing discs that do not specify
PANSCAN, playback is with LETTER BOX
even if you select the PANSCAN setting. Con-
firm whether the disc package bearsthe
16 : 9 LB
mark. (See page 8.)
! Some discs do not enable changingof the TV
aspect. For details, refer to the discsin-
structions.
Setting the parental lock
Some DVD video discs let you use parental
lock to restrict the viewing of violent and adult
oriented scenes by children. You can set the
parental lock level in steps as desired.
! When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be dis-
played. In this case, playback will begin
when the correct code number is input.
Setting the code number and level
When you first use this function, register your
code number. If you do not register a code
number, parental lock will not operate.
1 Touch SETUP and VISUAL and then
touch PARENTAL.
2 Touch 09 to input a four digit code
number.
3 While the input number is displayed,
touch ENTER.
The code number is set, and you can now set
the level.
Setting up the DVD player
En
72
Section
15