Filter
Top Products
11
Connecting the System
ENG/MASTER 96
12
Connecting the power cord (2)
This product
Yellow
To the terminal always supplied with power regardless o
f
ignition switch position.
Fuse holder (7.5 A)
Red
To the electric terminal controlled by the ignition switch
(12 V DC) ON/OFF.
Do not connect this lead to power source terminals to
which power is continuously supplied. If the lead is
connected to such terminals, the battery may be drained.
Orange/white
To lighting switch terminal.
Black
To vehicle (metal) body. To keep electromagnetic
noise from the vehicle body out of the navigation
system, attach this lead near the main unit.
Fuse resistor
Fuse resistor
Yellow/black, Purple/white, Pink, Lightgreen
Note: When replacing the fuse, be
sure to use only a fuse of the rating
prescribed on the fuse holder.
Power cord
See
pages 9-10.
Note: The yellow, red, and orange/white leads should
be connected to the opposite side of the fusebox
terminals from the battery.
☞
Note:
Cords for this product and those for other products
may be different colors even if they have the same
function. When connecting this product to another
product, refer to the supplied Installation manuals
of both products and connect cords that have the
same function.
CRD3914A_inst_001_030_Eng 5/11/04 4:40 PM Page 12