Filter
Top Products
27
Installation
3. Cut off the extra portion of the
belt.
• If some of the belt still protrudes,
fold it back into the slot so that it
does not interfere with driving.
4. Fasten the other belt in the same
way.
5. Install the remote control unit in
the holder.
• When removing the remote control
unit from the holder, move the cor-
rugated release section (*1) toward
the steering wheel as far as possible
before sliding the remote control
unit toward you.
ENG/MASTER 96
28
Installing the microphone
Installation notes
• Install the microphone in a position and orientation that will enable it to pick up well the
voice of the person operating the system by voice.
Parts supplied
Clamp
(5 pcs.)
Double-sided tape
(small)
Microphone clipMicrophone
*1
CRD3914A_inst_001_030_Eng 5/11/04 4:40 PM Page 28