Filter
Top Products
18
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
ENG/MASTER 96
19
• Install with the left and right sides of the Navigation Unit perpendicular or par-
allel to your vehicle’s direction of travel. Do not install diagonally to your vehi-
cle’s direction of travel or the current location will be displayed incorrectly.
• If you install the left and right sides of the Navigation Unit parallel to your
vehicle’s direction of travel, switch the installation direction lever, and attach
the locking screw to the “↔” side, or else the G sensor mounted in the
Navigation Unit will not operate correctly.
If you install with the left and right sides of the Navigation Unit parallel to your
vehicle’s forward / backward direction
If you install with the left and right sides of the Navigation Unit parallel to your vehicle’s
forward / backward direction, remove the mounting screw underneath the Navigation Unit,
and switch the installation direction lever. Then change the screw mounting position from
“↔” side to “↕” side. If the screw is attached to the “↔” side, the G sensor mounted in the
Navigation Unit will not operate correctly.
1. Remove the locking screw attached to the installation direction lever.
2. Switch the lever, and attach the mounting screw to the “↔” side.
Locking screw
Installation direction lever
Underneath the DVD Navigation Unit
Locking screw
Installation direction lever
Front
Front Front
Front
Front
(Perpendicular)
Attachment
position of the
locking screw ↕
(Parallel)
Attachment
position of the
locking screw ↔
Forward / Backward
direction of vehicle
Forward / Backward
direction of vehicle
Forward / Backward
direction of vehicle
CRD3914A_inst_001_030_Eng 5/11/04 4:40 PM Page 19