Filter
Top Products
Connecting the system
Connecting to the display with 26-pin input (e. g. AVH-P6600DVD, AVX-P8DVD, etc.)
8
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
ENG/MASTER 96
9
Power cord
Black
This product
Microphone
Yellow
GPS antenna
☞
See page 22.
☞
See page 27.
(e.g. AVH-P6600DVD, AVH-P7500DVD,
AVH-P6500DVD, AVD-W6210, AVX-P8DVD)
Not used.
26-pin cable (supplied)
6m (19ft 8in.)
☞
See pages 9-11.
When resetting AV Head Unit or AV
system display
When pressing the reset button of AV Head
Unit or AV system display while Navigation
System and AV Head Unit or AV system dis-
play (AVH-P7500DVD, AVH-P6500DVD,
AVH-P6600DVD, AVX-P8DVD) are com-
bined, make sure that ACC is turned OFF. If
the reset button is pressed while ACC is ON,
it may not work properly.
Display Unit
There may be no voice guidance depending on a com-
bined display unit. In that case, an external speaker
(commercially available) must be connected to the SP-
OUT jack (3.5 ø MINI JACK, 1 W max [8 Ω]) on this
unit’s back.
When combining multi-channel processors, Pioneer
external speaker must be connected to the SP-OUT jack
on the navigation’s back. If your display has the GUIDE
SP OUT jack that can output the voice guidance, con-
nect the external speaker to the display.
CRD3914A_inst_001_030_Eng 5/11/04 4:40 PM Page 9