Filter
Top Products
Remote control handling notes
• Always keep the remote control protected from direct sunlight or high temperatures.
Leaving the remote control in places exposed to direct sunlight or high temperatures for
long periods of time may cause deformation, discolouration or malfunction.
• Replace the battery when the remote control’s performance deteriorates.
• Do not install this unit in such a place as may obstruct the driver’s view.
• Since interior layout differs depending on the type of vehicle, the ideal installation loca-
tion for the unit also differs. When installing the unit, select a location that assures opti-
mum transmission of signals from the unit to the display.
Installing the holders and the steering remote control
Note:
• When the unit is installed on a right-hand-drive vehicle, the horizontal positions are inverted.
26
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
ENG/MASTER 96
27
1. Hook the belt on to the holder. 2. Fix the holder to the inside edge
of the steering wheel so that the
holder is facing the driver.
• Wrap the belt around the outside
edge of the steering wheel, passing
the end through the slot in the hold-
er.
• Pull on the belt to tighten it then
secure it using the other two hooks
on the holder.
CRD3914A_inst_001_030_Eng 5/11/04 4:40 PM Page 27